LiteDimmer Hybrid is a manually controlled, flicker-free LED dimmer. Designed exclusively for use on film, TV and HD Video sets, it offers control of Kelvin temperature along with brightness when used with VHO Pro Hybrid LiteRibbon. Like its little brother LiteDimmer Single, it features an ultra-smooth dimming range using our patent-pending flicker-free circuit.
Including a 2.1mm barrel input connector, and HyConn output, LiteDimmer Hybrids interface includes 2 knobs, one for Kelvin, one for brightness. These knobs include a hide-away feature that eliminates accidental level changes and assists in storage. An on-off switch allows for cueing and allows for several optional advance modes. With the switch in the UP position, LiteDimmer Hybrid will maintain the light level while changing Kelvin temp and will maintain Kelvin temp when changing light level. While the switch in the DOWN position, one of three modes are available.
The LiteDimmer is housed in an extruded, black anodized aluminum case with rubber bumpers that eliminate damage to sensitive surfaces.
LiteDimmer Hybrid is the most advanced handheld LED dimmer on the market. It is the backbone of LiteGear's Hybrid LED products. Hybrid LiteRibbon™ is designed with both daylight and tungsten LED emitters that when used with LiteDimmer Hybrid allow precise adjustment of Kelvin temperature ranging from 3200K to 6000K. Its simple yet powerful approach to controlling color temperature and brightness sets a new standard of performance and quality while allowing the kind of exibility demanded from lighting professionals. LiteDimmer Hybrid utilizes a unique LiteGear design called DynaRythmic PWM, which allows Kelvin and brightness settings to remain completely independent. This allows the user to lock in the brightness level desired and then dial in a precise Kelvin temperature anywhere in the full spectrum range from tungsten to daylight. All this is accomplished with the condence of knowing that all settings are completely icker-free, tested at camera speeds up to 480 FPS. One LiteDimmer Hybrid is capable of controlling approximately 1,200 VHO LED emitters. This equates to 10 meters of Pro 120-X1 Hybrid and 20 meters of Pro 60-X1 Hybrid. LiteDimmer Hybrid oers a beautiful, full output dimming range from 0% to 100% and also includes dierent modes that allow for greater control of LiteRibbon™. LOW mode dramatically increases the range of adjustment on the low-end, allowing for appropriate level control when working at low light levels. OVERDRIVE mode increases the light output by up to one full F-stop and truly allows for the dimmer to be maxed out. And 2-CHANNEL mode allows LiteDimmer Hybid to function as two "Single" dimmers when needed.
The Rosco LitePad 2 Channel/DMX Dimmer allows the dimming of two LitePads or two groups of LitePads via slide faders or DMX protocol. It has a maximum load of 5 amps (60watts) and input/output is 12v DC.
This 2 channel dimmer offers simple, versatile control of the LED based Rosco LitePad luminaire, providing smooth dimming from 0%-100% output with no change in color temperature. The compact dimmer module has two output channels of manual control via sliding faders, independently dimming 2 separate LitePad units of groups of units. A maximum total load of 5A can be split between the 2 channels.
For applications where automated control via the DMX protocol is desired, simple plug the dimmer unit into a DMX chain and assign an address via digital display pad. A DMX signal presence overrides any setting of the manual faders. If the DMX signal is lost, control reverts immediately to any setting of the manual fader.
This LitePad dimmer allows for the dimming of two LitePads or two groups of LitePad via slide faders or DMX protocol.