LiteDimmer Hybrid is a manually controlled, flicker-free LED dimmer. Designed exclusively for use on film, TV and HD Video sets, it offers control of Kelvin temperature along with brightness when used with VHO Pro Hybrid LiteRibbon. Like its little brother LiteDimmer Single, it features an ultra-smooth dimming range using our patent-pending flicker-free circuit.
Including a 2.1mm barrel input connector, and HyConn output, LiteDimmer Hybrids interface includes 2 knobs, one for Kelvin, one for brightness. These knobs include a hide-away feature that eliminates accidental level changes and assists in storage. An on-off switch allows for cueing and allows for several optional advance modes. With the switch in the UP position, LiteDimmer Hybrid will maintain the light level while changing Kelvin temp and will maintain Kelvin temp when changing light level. While the switch in the DOWN position, one of three modes are available.
The LiteDimmer is housed in an extruded, black anodized aluminum case with rubber bumpers that eliminate damage to sensitive surfaces.
LiteDimmer Hybrid is the most advanced handheld LED dimmer on the market. It is the backbone of LiteGear's Hybrid LED products. Hybrid LiteRibbon™ is designed with both daylight and tungsten LED emitters that when used with LiteDimmer Hybrid allow precise adjustment of Kelvin temperature ranging from 3200K to 6000K. Its simple yet powerful approach to controlling color temperature and brightness sets a new standard of performance and quality while allowing the kind of exibility demanded from lighting professionals. LiteDimmer Hybrid utilizes a unique LiteGear design called DynaRythmic PWM, which allows Kelvin and brightness settings to remain completely independent. This allows the user to lock in the brightness level desired and then dial in a precise Kelvin temperature anywhere in the full spectrum range from tungsten to daylight. All this is accomplished with the condence of knowing that all settings are completely icker-free, tested at camera speeds up to 480 FPS. One LiteDimmer Hybrid is capable of controlling approximately 1,200 VHO LED emitters. This equates to 10 meters of Pro 120-X1 Hybrid and 20 meters of Pro 60-X1 Hybrid. LiteDimmer Hybrid oers a beautiful, full output dimming range from 0% to 100% and also includes dierent modes that allow for greater control of LiteRibbon™. LOW mode dramatically increases the range of adjustment on the low-end, allowing for appropriate level control when working at low light levels. OVERDRIVE mode increases the light output by up to one full F-stop and truly allows for the dimmer to be maxed out. And 2-CHANNEL mode allows LiteDimmer Hybid to function as two "Single" dimmers when needed.
The new VHO Pro LED LiteRibbon is the simplest color correct lighting product available. Years in the making, just 3 simple components make this minimal light source created exclusively for cinema and tv production. At its core, the new VHO Pro LED emitters are a design breakthrough. We have created a beautiful, full spectrum, white light that renders skin-tones and colors to their natural state. VHO Pro emitters are fully color-correct and blend freely with legacy tungsten and fluorescent units as well as modern high-end LED fixtures from Arri, Mole Richardson and others. VHO Pro emitters are the first LEDs to bring high CRI, full spectrum color-correct white light to what we call low-output LED products. Typically reserved for high wattage and high cost LED fixtures, the new VHO Pro line brings color-correct white light into the affordable range.
Genuine VHO Pro LiteRibbon™ is available in 24 variations. There are TWO densities, Hard 120 and Soft 60. FOUR widths, single, double, triple and six rows wide. And, THREE colors of full-spectrum white, Tungsten, Daylite, and tunable-white Hybrid.
VHO Pro emitters have been specifically formulated to render skin-tones beautifully. Their wide-angle output, combined with their ultra-low power consumption allows for precise control of daylight or tungsten balanced light in previously impossible areas of the set or prop or wardrobe project. Digital cinema cameras are finally living up to their promise of using less light without loss of image quality. At the same time, they are more sensitive than ever to low-CRI or poor quality white light. That’s why precise low output control of beautiful, full spectrum white light is more important than ever. VHO Pro Tungsten and Daylite produce full-spectrum color-correct light with a 120º output at only 0.16 watts each!
VHO Pro LiteRibbon™ is available in two densities. Hard, high-density 120 and soft, low-density 60. VHO 120 provides a concentrated, slightly “hard” output at about 1.5 watts per square inch. When specifying an intense light source for a small area, VHO 120 is a great choice. When more subdued light is required, VHO 60 provides an unmistakable soft light output. Clocking in at just 0.37 watts per square inch, it produces beautiful soft light without the need for diffusion filters. Both the hard 120 and soft 60 offer a wide-angle output with graceful, tapered edges and a perfectly even field.
If applying LED LiteRibbon™ to an automobile interior headliner, choose the harder VHO 120 to augment the dome light. The smaller but more powerfull output will yield a nice, directional, and believable output. Conversely, to provide a soft and subtle overhead feel, VHO 60 is recommended. Because it spreads the LED emitters out over a larger area, a softer light output is created. This is a great way to provide a delicate and sourceless overhead light.
Available in four widths, VHO Pro X1, X2, X3, and X6
Single wide “X1” features a solitary row of emitters while double wide “X2” offers a twin row. Completing the line is the triple wide “X3” and six wide “X6”. All four are available in the hard, high-density 120 as well as the softer, low-density 60 in either 3200k Tungsten, 5600k Daylite, or tunable Kelvin temperature Hybrid White.
If the desired type of light is linear, VHO 120’s X1, X2 or X3 are a great choice. These provide light output that is sharp and cuttable in one direction but softer in the other. In contrast, VHO 60 supplies a noticeably softer output when in both horizontal and vertical directions. The choice of which “X” to use comes down to the amount of surface area your project requires.
VHO Pro Tungsten provides an incandescent-like color that appears warm to the eye and to the camera. Performing at 3200º K and 95 CRI, VHO Tungsten is named for the metallic element that has been commonly associated with incandescent lighting. It beautifully mixes with legacy tungsten and halogen light sources but dims without Kelvin temperature shift.
VHO Pro Daylite provides mid-day, sun-like hues that can be used to boost available daylight without the use of filters. Performing at 6000º K and 95 CRI, VHO Daylite is named for the industry term used for other color-correct technologies like fluorescent and HMI. It has more in common with these other technologies than its name. VHO Daylite has been designed to match color and spectrum making it easy to openly mix light sources and lighting technologies.
VHO Pro Hybrid provides all the benefits of VHO Tungsten and Daylite along with the range of Kelvin temperatures between 3200ºK and 6000ºK. This obvious advantage allows your LiteRibbon™ package or kit to always provide the required white-balance without the need for filters. When used with our LiteDimmer Hybrid, you get granular control of Kelvin temperature along with master brightness and with its low-mode, it is possible to achieve ultra-precise low-light level control.
Lumens Per Meter
FC @ 12″
FC @ 24″
FC @ 36″
FC @ 48″
FC @ 60″
LED Pitch (mm)
Segments Per Meter
LEDs Per Meter
Drive Current mA/Meter)
Power Consumption W/Meter
240(120 x 2)
360(120 x 3)
60(120 x 3)
120 (180 per unit)
720 (120 X 6)
(180 per unit)
9600 (2.4A Total)
115.2(28.8 per unit)
120 (60 x 2)
180 (60 x 3)
60 (30 per unit)
360 (60 X 6)
4800 (2.4A Total)
57.6 (28.8 per unit)
The Litepanels Micro is a compact addition to the Litepanels LED family of lighting. This light will work for on-camera applications with small cameras, offering a small size and an adjustable head.
Note: Power Supply is optional
LitePad HO+ is a slim profile, edge-lit LED light source. At only 1/3" (a third of an inch) thick, LitePad HO+ is able to fit in places where conventional light sources will not. LitePad HO+ produces a soft quality of light that is easy on the eyes and runs at cool temperatures. Available in eight standard sizes, LitePad HO+ has LEDs on all four sides of the perimeter for maximum brightness. An interior connector provides a solid power connection directly on the LitePad itself. Available in both daylight and tungsten color temperatures, LitePad HO+ can fit a wide variety of applications.
LitePad Axiom® is a revolutionary LED light from Rosco specifically designed for filmmakers, videographers and still photographers.
Its steel and aluminum housing is designed not only to protect the light source, but to make a variety of mounting solutions quick and easy. The back of the housing has a universal mounting system allowing the LitePad Axiom® to be affixed with brackets to C-Stands or mounted with Velcro, rubber bands or other conventional methods. The housing includes a gel slot for adding Roscolux or Cinegel color or diffusion.
An interior connection in the LitePad unit assures secure electrical connection. The slim profile, low heat and power consumption and outstanding quality of light make LitePad Axiom® an excellent choice for professionals everywhere.
Color Temperature (Approximate): Daylight: 5800°K
Lamp Life: 60,000 hrs
Operating Temperature: -30°C - +85°C
Power: 12V DC Input
The Rosco LitePad 2 Channel/DMX Dimmer allows the dimming of two LitePads or two groups of LitePads via slide faders or DMX protocol. It has a maximum load of 5 amps (60watts) and input/output is 12v DC.
This 2 channel dimmer offers simple, versatile control of the LED based Rosco LitePad luminaire, providing smooth dimming from 0%-100% output with no change in color temperature. The compact dimmer module has two output channels of manual control via sliding faders, independently dimming 2 separate LitePad units of groups of units. A maximum total load of 5A can be split between the 2 channels.
For applications where automated control via the DMX protocol is desired, simple plug the dimmer unit into a DMX chain and assign an address via digital display pad. A DMX signal presence overrides any setting of the manual faders. If the DMX signal is lost, control reverts immediately to any setting of the manual fader.
This LitePad dimmer allows for the dimming of two LitePads or two groups of LitePad via slide faders or DMX protocol.