PagLok

    • 4-channel sequential fast-charger for a broad range of batteries
    • All-chemistry: Li-Ion, Ni-MH and Ni-Cd
    • Range: 4.8V to 14.8V, 1Ah to 10Ah
    • 4 x PAGlok Connectors
    • 4 x PP90 sockets for connection of charge adaptors
    • PAG ACS microcomputer-controlled charging
    • Auto-Charge Rate Selection
    • Discharge Program
    • Recovery Charge Program
    • Li-Ion Battery Recovery
    • Forward compatible via chip-update kits
    • 82 x 168 x 240mm / 1.23kg

    Using a PAG charger to charge and manage your PAG batteries is the best way to achieve the maximum possible cycle life.

    The AR124PLD is a 4-channel all-chemistry sequential charger for all PAGlok batteries.

    PAG V-Mount batteries can be charged via the front PP90 sockets and charge adaptor Model 9617. Other battery types, such as Sony V-Mount, Anton-Bauer and NP1 can also be charged using the appropriate charge adaptor, available from PAG.

    The Auto Charge rate Selection feature provides the easiest and most efficient way of managing batteries that vary in terms of cell chemistry, voltage and capacity. The program detects the battery’s cell chemistry, state-of-charge, capacity and condition, and then applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life. The charge rate can also be manually set at 2A, 3A or 4A.

    A Li-Ion battery recovery feature is included, to recover Li-Ion batteries if their cut-out has been tripped.

    A Recovery Charge Program regains capacity lost during periods of extended storage.

    The AR124PLD incorporates PAG’s analytic Charge/Discharge program, which ‘repairs’ batteries that have been repeatedly subjected to partial discharging. The program measures and displays battery capacity.

    The large backlit LCD screen shows the battery status throughout the charging process.

  • PAG - L95 Time Battery PAGlok

     

    The L95 Time Battery combines power, accuracy and reliability, and is the industrys most advanced battery.One of the major advantages of the L95 Time Battery is PAGs unique Power & Time Display. It shows remaining camera run-time, counting down in 1 minute increments, which is updated against changes in load. The easy-to-read digital character display also shows available capacity in 1% or 0.1Ah increments. PAG is the only manufacturer to offer this level of accuracy.

     

    • Construction:
      The casing for these models consists of high-impact polycarbonate injection mouldings,
      featuring an internal cradle designed to protect the cells from impact damage. The cells have welded interconnections of low-resistance nickel strap. The batteries are sealed and non user-serviceable.
    • Cells:
      Premium grade Lithium-Ion sealed rechargeable cylindrical cells.
    • Voltage:
      14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.
    • Capacity:
      Nominal 6.5 ampere-hours, with a charge voltage of 4.2V per cell, and discharged at the one-hour rate.
    • Charge Time:
      The battery may require up to 3 hours to charge from the fully discharged state. Charge time will be less if the battery is partially charged at the start.
    • Output Current:
      Rated maximum continuous output current is 5.5 amperes.
    • RF Resistance:
      PAG L95 Li-Ion batteries comply with the EC EMC directive and are resistant to interference when used in close proximity to radio transcievers.
    • Power & Time Display:
      PAG Time Batteries incorporate state-of-the-art low-power microelectronic circuits that give the user access to the battery state of charge and run-time information. An accurate on-load run-time prediction in hours and minutes is provided on the battery's built-in Power & Time display. The device can also display capacity in ampere-hours in 0.1Ah increments, and percentage of remaining available capacity in 1% increments.

     

    Protection:


    The battery incorporates the following safety shutdown systems:

    3 over-current shutdown systems.
    2 over-voltage shutdown systems.
    2 under-voltage shutdown systems.
    2 thermal shutdown systems (including a non-resetting thermal fuse).
    All protection circuits within the battery are designed to withstand the leakage of electrolyte.



    Operating Temperature Range:


    Optimum discharge efficiency is achieved within the temperature range +10°C to +40°C.

    V/Ah 14.8V 6.5Ah 95Wh
    Size 130 x 86 x 42mm
    Weight 0.75kg
  • PAG - PAGlok Mount Adapter PAGlok to V-Mount Battery

     

    Product Overview:

    An adapter for V-Mount batteries. This adapter enables a V-Mount type battery to connect to a camcorder with an existing PAGlok mount connector.

     

    Packaging Info
    Package Weight 1.0 lb
    Box Dimensions (LxWxH) 8.0 x 6.0 x 4.0"
  • PAG - Power Plate (2 x PAGlok L95 to V-Mount)

     

    Product Overview:

    • Combines the capacities of two PAGlok batteries (L95/L96)
    • Ideal for high-load applications or extended run-time
    • Achieve a high-capacity Li-Ion power source that has no air transport restrictions
    • For camera fitted with Sony V-Mount
    • 215 x 132 x 40mm / 0.42kg

     

    A dual battery mount that provides combined battery capacity for longer run-times and a higher current draw capability.

    Using two L96 batteries in parallel provides a capacity of 192 watt-hours and allows up to 10A to be drawn.

    The Power Plate is ideal for power-hungry high-definition cameras, or for powering a camera and on-board light simultaneously for extended periods.

    This model adapts your V-Mount for use with PAGlok batteries.

    A single Li-Ion battery that has a capacity equal to two L96 batteries (192 watt-hours) cannot be transported by passenger aircraft. Combining the capacities of two 96 watt-hour batteries gives you a high-capacity or high-load Li-Ion power source that you can fly with to any location.