Decimator Design - MD-QUAD

MINIATURE (3G/HD/SD)-SDI MultiViewer / Quad-Split with (3G/HD/SDI)-SDI and HDMI Outputs.

NEW FEATURES:
(Excluding units with serials starting with MQS)
•  Professional 3G/HD/SD Test Pattern Generator featuring:
    - 26 Selectable Output Formats
    - 54 Test Patterns including Luma and Chroma Zone-plates
•  Audio Tone Generator
•  In Quad-Split mode the first 8-channels of audio from any input can now be passed to both the HDMI and SDI output
•  On-screen audio id pop-up when selection audio source in Quad-Split mode
•  On-screen display pop-up when using the rotary to allow for use when without a PC

FEATURES:
•  Miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or 4 to 1 input multiplexer
•  Selectable output format in Quad-Split mode
•  Dynamic UMD and Tally support via RS422/485 pins on RJ45 connector
•  GPI on RJ-45 for remote switching and Tallies
•  Low latency buffering for each input allowing non-synchronous inputs
•  Linked (3G/HD/SD)-SDI and HDMI outputs
•  4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
•  8-Channel Audio metering for each quadrant with:
    - The first two audio groups individually selectable
    - Vertical or Horizontal Bars
    - AES/EBU, VU, Extended VU, BBC, EBU, DIN and
      NORDIC Scales
    - Bar & Float, Bar only or
      Float only (Float is not available for MQS serials)
    - Transparency adjustment
    - Separate Bar and Float Ballistics control
    - Adjustable Reference level
    - Red, Yellow and Green Range adjustment
    - Bar thickness adjustment
    - Margin adjustment
•  Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
•  Variable aspect ratios per quadrant
•  All 4 inputs can be displayed simultaneously on a single output
•  Pass-Through mode allowing any of the 4 inputs to be selected for output
•  In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs
•  On-Screen 16 character IDs (UMDs) for each input
•  An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection. LEDs and push button can then be used for status and control
•  USB port for control and updates
•  Locking DC Power Socket